Part Number NAS1112-36D with NSN 5306008350885 by National Aerospace Standards Com is Ready for Purchase!

Part Number: NAS1112-36D

Alternate P/N: NAS111236D

Manufacturer: National Aerospace Standards Com

NSN: 5306-00-835-0885

NIIN: 008350885

Item Name : Bolt Shear

CAGE Code: 80205

FSC: 5306 Bolts

FSG: 53 Hardware and Abrasives

Country: USA

NCB Code: 00

Thank you for choosing to fulfill your operational requirements with the Bolt Shear NSN parts we have in stock on ASAP Ground Support Equipment. On this page, you can submit a quote request for National Aerospace Standards Com part number NAS1112-36D, a component that can also be found by inputting NSN 5306008350885 in our search engine. Alongside part number NAS1112-36D, we also have a wide range of other related items in stock that can be traced back to a plethora of trusted manufacturers on our Approved Vendor List (AVL).

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Customer Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Note : We Will Not Share Your Information To Any Third Parties.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

ASAP Ground Support Equipment works with numerous government and defense agencies, so we use CAGE Codes like 80205 to uniquely identify items and the locations where they were produced in a standardized manner. Moreover, we also utilize Federal Supply Classes (FSCs) to organize our stock, ensuring customers can find part number NAS1112-36D by National Aerospace Standards Com under FSC 5306 Bolts with ease. With this in mind, do not hesitate to complete the RFQ form below for NSN 5306008350885 or any others that pique your interest, and expect a customized sourcing solution in 15 minutes or less. For one-on-one assistance, contact us via phone or email at any time; we are available 24/7x365!

NSN Information for Part Number NAS1112-36D with NSN 5306-00-835-0885, 5306008350885

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-00-835-0885 Item PartTypeName: BOLT,SHEAR	5306	008350885	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
NAS1112-36D	2	2	3

Characteristics Data of NSN 5306-00-835-0885, 5306008350885

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASB	FASTENER LENGTH	2.822 INCHES NOMINAL
AASK	HEAD STYLE	DISHED HEXAGON
AHYM	NOMINAL THREAD DIAMETER	0.750 INCHES
ANEE	GRIP LENGTH	2.250 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	16
CQFM	HARDNESS RATING	36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
SFTT	SURFACE TREATMENT	CADMIUM OVERALL AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AASA	THREAD LENGTH	0.572 INCHES MINIMUM
AASU	HEAD HEIGHT	0.375 INCHES NOMINAL
AATB	WIDTH BETWEEN FLATS	1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
AAUR	GRIP DIAMETER	0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES NOMINAL FIRST HOLE
CQBC	MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.694 INCHES NOMINAL FIRST HOLE
MATT	MATERIAL	STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4037 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATE
THSD	THREAD SERIES DESIGNATOR	UNF